ECC-UH VARIATIONS

Cutout Covers ECC-UH-Series

Cutout Cover ECC-UH

The ECC-UH series are a universal cutout cover that fits porcelain and polymer type XS cutouts, 110, 125 and 150 BIL cutouts. The front of the cover is taller than the ECC-UM series and an extension cannot be added. To add the extension to the front for added coverage see ECC-UHC. For porcelain cutouts install the pins one high and one low, as shown. For polymer cutouts install both pins in the lower two holes.

Cutout Cover ECC-UH-FR

The ECC-UH-FR is a flame retardant universal cutout cover that fits porcelain and polymer type XS cutouts, 110, 125 and 150 BIL cutouts. For porcelain cutouts install the pins one high and one low, as shown. For polymer cutouts install both pins in the lower two holes. ECC-UH-FR is rated UL 94 5VA, the highest rating for the standard.

Cutout Cover ECC-UHC

The ECC-UHC cutout cover is molded with the capability to add an extension to the front of the cutout cover for added coverage. The extension can be ordered separately, part number CE-1.

Cutout Cover ECC-UHC-FR

The ECC-UHC-FR is molded with cruciforms for the capability to add an extension to the front of the cover for added coverage.The extension can be ordered separately or with the ECC-UHC. Part number with the extension would be ECC-UHCE. Flame retardant, FR UL 94 5VA.

Cutout Cover ECC-UHCS

The ECC-UHCS is molded with the capability to add an extension to the front of the cover for added coverage and includes a squirrel guard. The squirrel guard closes off the back and most of the top opening of the cutout cover to help prevent squirrels from packing nuts inside the cover.

Cutout Cover ECC-UHCE

The ECC-UHCE includes the extension for added coverage to the front of the cover. The extension is shipped with the cover separately. Designed for fuses that are located further out away from normal expulsion fuses such as the Fault Tamer fuses manufactured by S&C Electric.

Cutout Cover ECC-UHCE-FR

The ECC-UHCE is a universal cutout cover with the added snap in extension for additional coverage. Designed for porcelain and polymer cutouts. 110, 125 and 150 BIL. When a fault tamer fuse is used an extension is added to lengthen the top section of the cover as shown. The extension is an add on component. Simply snap the extenson into the cover for added protection.The extension will not interfere with a loadbreak tool operation. Flame retardant, FR UL 94 5VA.